You are here:

Jamb Glue How to Make It?

Jamb Glue How to Make It

Jamb adhesive, commonly used in construction projects to bond materials like expanded polystyrene (EPS), is an adhesive that can be easily prepared at home. In this article, step-by-step instructions on how to make and use jamb adhesive will be detailed.

Materials Needed:

  • Expanded polystyrene (EPS) sheets
  • Glue gun and glue sticks
  • Cutting tools (knife, scissors, etc.)
  • Protective gloves and goggles

Step-by-Step Process of Making Jamb Adhesive:

Step 1: Prepare the Materials

Firstly, prepare the materials needed for the adhesive. Cut the EPS sheets to the desired size for your project and wear the necessary protective equipment.

Step 2: Prepare the Adhesive Mixture

Heat the glue gun to the appropriate temperature and insert the glue stick. Then, wait a few minutes for the glue to melt evenly.

Step 3: Making Process

Apply an equal amount of adhesive to the surfaces of the EPS sheets using the glue gun. Then, press the surfaces together and apply steady pressure for a few minutes to ensure proper bonding of the adhesive.

Tips and Tricks:

  • Always wear protective equipment when using the glue gun to ensure safe usage.
  • Use cutting tools carefully when cutting EPS sheets and protect yourself from injuries during the cutting process.
  • Immediately press the surfaces together after applying the adhesive as the glue dries quickly.

Usage and Storage of Jamb Adhesive:

You can use the prepared jamb adhesive for your projects. Store any leftover adhesive in a dry and warm place. After using the glue gun, remove the used glue stick and clean the gun with a clean cloth. Remember to close the glue gun after use and store it safely.


Making jamb adhesive is a simple and useful method for construction projects. By following the steps carefully, you can bond EPS sheets together and achieve a strong bond. Use the prepared jamb adhesive to complete your projects and achieve the desired results.